Wittke Front Loaders

The Starlight & The Superduty

The Wittke Starlight is known for its agility. Its low body weight maximizes the legal payload capacity and its fast lifting cycle ensures rapid loading on the route. The Starlight tackles both residential and commercial routes with ease and with its low body weight, you will be able to collect more material, providing the highest legal payload ever on each collection.

The Wittke Superduty is as rugged as they get. The Wittke Superduty is the toughest of all front loaders; engineered to require nominal maintenance and providing the lowest total cost of ownership.


The Wittke Series

  •  
    A

    Features

    Wittke™ Starlight & Superduty

     
    Wittke Features
     
  •  
    B

    Specifications

    Wittke™ Front Loaders

     

     BODY DIMENSIONS (in.)

    32yd³
    (30+2)
    34yd³
    (30+4)
    36yd³
    (34+2)
    38yd³
    (34+4)
    40yd³
    (34+6)
    40yd³
    (38+2)
    42yd³
    (38+4)
    44yd³
    (38+6)
     Overall Width (in.) 102 102 102 102 102 102 102 102
     Overall Length With Arms Up. Tailgate Closed (in.) 243 258 267 282 297 292 309 324
     Overall Length With Arms And Forks Down. Tailgate Closed (in.) 407 422 431 446 461 456 473 488
     Overall Height Above Frame With Arms Down. Tailgate Closed (in.) 110 110 110 110 110 110 110 110
     Overall Height Above Frame With Arms Up. Tailgate Closed (in.) 118 118 118 118 118 118 118 118
     Overall Height Above Frame. Tailgate Opened (in.) 177 177 177 177 177 177 177 177

     BODY SPECIFICATIONS

     Body Floor 0.156 in. (SL),  3/16 in. (SD) AR450 175,000psi
     Body Sides 1/8 in. (SL),  0.156 in. (SD) AR450 175,000psi
     Body Roof 1/8 in. (SL),  0.156 in. (SD) AR450 175,000psi
     Tailgate 1/8 in. (SL),  0.156 in. (SD) AR450 175,000psi

     HOPPER SPECIFICATIONS

     Hopper Size (yd³) 12
     Hopper Width 80 in. 
     Hopper Floor 3/16 in. (SL),  1/4 in. (SD) AR450 175,000psi
     Hopper Sides  0.156 in. (SL),  3/16 in. (SD) AR450 175,000psi

     ARM SPECIFICATIONS

     Arms Thickness 4 in. Domex 100 100,000psi
     Arms Lift Capacity 8,000 lbs
     Arms Cycle Time 14 sec @ 1500 rpm

     FORKS SPECIFICATIONS

     Forks Thickness 1 in. (SL),  1-1/2 in. (SD) Domex 100 100,000psi
     Forks Cycle Time 4 sec @ 1500 rpm

     PACKER SPECIFICATIONS

     Packer Panel Cycle Time 20 sec @ 1500 rpm
     Packer Panel Lower Face Plate 3/16 in. AR450 175,000psi
     Packer Panel Upper Face Plate 0.156 in. AR450 175,000psi
     Bottom packer Wear Shoes 3/8 in. AR450 175,000psi

     HYDRAULIC SPECIFICATIONS

     Pump Make & Model Muncie Live Pak (gear)
     Pump Capacity 60 gpm @ 1500 rpm
     Max. Operating Pressure 2,500 psi (SL),  2,750 psi (SD)
     Oil Reservoir 60 gal

     HYDRAULIC SPECIFICATIONS

     Packer Cylinders 3 stages 5-1/2 in. Bore
     Arms Cylinders 4-1/2 in. bore x 2 in. rod x 45 in. stroke
     Forks Cylinders 3-1/2 in. bore x 1-3/4 in. rod x 19 in. stroke
     Tailgate Cylinders 2-1/2 in. bore x 1-3/4 in. rod x 39 in. stroke
     Top Door Cylinder 2-1/2 in. bore x 1-1/2 in. rod x 92 in. stroke
     

     

     Note: Specifications subject to changes without notice

       
       
  •  
    C

    A CLEANER WAY OF DOING BUSINESS

    CNG Ready since 2001

     
    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.

     

     

    THE BENEFITS OF CHOOSING CNG ARE HUGE:

    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck

    LABRIE CNG SIMPLE, RELIABLE AND PRODUCTIVE

    • Low height, integrated body shape, roof mounted design. 4 or 5 tanks, 60 to 75 DGE
    • Premium design having low impact on legal payload

     

    CNG Ready Trucks



     

     

     

     

     

  •  
    E

    Dealers & Demos

    Call us for more info

     

    Dealers in the US

    Distributors in the US


    In Canada

    Distributors in Canada


    International

    International Distributor;

    General Sales & Demos

    Sales
    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos
       
     

Menu.

Home

Our Trucks

If Your Route Is

Our Certified Dealers

Parts & Service

About Labrie

Contact Us

Latest News

Find a Sales Rep

Click to find and contact one of our Sales Representatives.   Find a Sales Rep

Request a Quote

If you wish to request a quote to get pricing on a Labrie, Leach or Wittke truck, please use our Online Quote Request form   Request a Quote

Request Information

Thank you for your interest in Labrie Enviroquip Group Products. For more information, you may complete our Request Information Form.   Request information