Minimax Side Loader

The Minimax Series

Throughout our history we have proven our reputation as both an innovator and an industry leader in bringing optimal collection solutions to our customers while delivering the maximum value for every dollar spent. With this in mind, we started considering solutions for short routes, missed pick ups, parks and recreation, airports, university campuses and all the other places where a nimble and maneuverable smaller truck just makes more sense.

The Minimax™ is the Answer

Completely redesigned and built tougher, this truck is the ideal solution for optimizing your route efficiency and reducing costs.

The Minimax Series

  •  
    A

    MINIMAX SERIES

    LABRIE ENGINEERING COMPACTED INTO A SMALLER SOLUTION. 

     

    As the side loader market leader, we designed the Minimax to stand up to our reputation as the industry leader of quality, innovative solutions. To that end, we've included all the best features of our larger side loaders into the Minimax to ensure it is the most productive and reliable truck in its category.

     KEY FEATURES

     
     • 10, 12 and 14 yd3 body configurations available in manual, semi or fully automated
     • Trusted Helping Hand arm with standard 84" reach on automated configuration
     • Full eject dumping system for a safe unloading process
     • Multiplex electrical system
     • Standard Durascope nitrated packer/ejector cylinders with shavers
     

     

     

     

  •  
    B

    Specifications

    Minimax Series

     

     BODY DIMENSIONS

    10yd³

    12yd³

    14yd³

     Overall Width (in.) 97 97 97
     Overall Length, Tailgate Closed (in.) 191 208 230
     Overall Height Above Frame. Tailgate Closed (in.) 78 78 78
     Overall Height Above Frame. Tailgate Opened (in.) 100 114 136

     BODY SPECIFICATIONS

     

     Body Floor 3/16 in. AR450 175,000psi
     Body Sides 12ga A1011 80,000psi
     Body Roof 12ga A1011 80,000psi
     Tailgate 12ga A1011 80,000psi

     HOPPER SPECIFICATIONS

     
     Hopper Size (cu.yd.) 0,6
     Hopper Floor 3/16 in. AR450 175,000psi
     Hopper Sides (lower) 3/16 in. 100QT 100,000psi

     PACKER SPECIFICATIONS

     

     Packer Panel Cycle Time 10 sec @ 1200 rpm
     Packer Panel Face Plate 3/16 in. AR450 175,000psi
     Packer Width 63 in.
     Packer Height 16 in.
     Packer Stroke 38 in.

     ARM SPECIFICATIONS

     

     Arm Lift Capacity 400 lbs
     Arm Reach 120 in.
     Arm Cycle Time 8 sec @ 0 in. reach; 18 sec @ 120 in. reach
     Arm Controls Proportional joystick, electric over hydraulic

     HYDRAULICS SPECIFICATIONS

     

     Pump Make & Model Dual Vane
     Pump Capacity BODY: 20 gpm@1200 rpm; ARM: 14 gpm@1200 rpm
     Max. Operating Pressure 2,500 psi
     Oil Reservoir 39 gal
     Oil Reservoir 39 gal

     CYLINDERS

     

     Packer Cylinder 4 stages 4-1/2 in. bore x 138 in. stroke
     Tailgate Cylinders 2-1/2 in. bore x 1-3/4 in. rod x 31 in. stroke
     Arm Extension Cylinder 2 in. bore x 1-1/4 in. rod x 70 in. stroke
     Lifting Cylinder 3 in. bore x 1-1/2 in. rod x 16 in. stroke
     Grabber Cylinder 1-1/2 in. bore x 1 in. rod x 6-1/4 in. stroke
     

     

      Note: Specifications subject to changes without notice

       




     

  •  
    C

    A CLEANER WAY OF DOING BUSINESS

    CNG Ready since 2001

     
    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.

     

     

    THE BENEFITS OF CHOOSING CNG ARE HUGE:

    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck

    LABRIE CNG SIMPLE, RELIABLE AND PRODUCTIVE

    • Behind the cab design built to hold 4 or 5 CNG tanks, 66 or 81 DGE
    • Low height, integrated body shape, 
    • Premium design having low impact on legal payload

     

    CNG Ready Trucks



     

     

     

     

     

  •  
    D

    Brochure & Media

    Labrie Minimax 

     

    For more information the Labrie Minimax

     

     

    Adobe PDF Download our Product Brochure
    Youtube Visit our Youtube Channel
  •  
    E

    Dealers & Demos

    Call us for more info

     

    Dealers in the US

    Distributors in the US


    In Canada

    Distributors in Canada


    International

    International Distributor;

    General Sales & Demos

    Sales
    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos
       
     

Menu.

Home

Our Trucks

If Your Route Is

Our Certified Dealers

Parts & Service

About Labrie

Contact Us

Latest News

Find a Sales Rep

Click to find and contact one of our Sales Representatives.   Find a Sales Rep

Request a Quote

If you wish to request a quote to get pricing on a Labrie, Leach or Wittke truck, please use our Online Quote Request form   Request a Quote

Request Information

Thank you for your interest in Labrie Enviroquip Group Products. For more information, you may complete our Request Information Form.   Request information