|
B
Specifications
Leach™ 2R-III
BODY DIMENSIONS
|
Heavy Duty 2R-III™ Residential
|
Heavy Duty 2R-III™ Commercial
|
Single Axle 20 yd³
|
Tandem Axle
|
Single Axle 20 yd³
|
Tandem Axle
|
25 yd³
|
29 yd³
|
32 yd³
|
25 yd³
|
29 yd³
|
32 yd³
|
Body Overall Length |
263" (6,678 mm) |
285" (7,236 mm) |
318" (8,075 mm) |
341" (8,659 mm) |
263" (6,678 mm) |
285" (7,236 mm) |
318" (8,075 mm) |
341" (8,659 mm) |
Cab to Axle |
Refer to Labrie chassis requirements |
Refer to Labrie chassis requirements |
After Frame |
Refer to Labrie chassis requirements |
Refer to Labrie chassis requirements |
Min. Requirement |
Refer to Labrie chassis requirements |
Refer to Labrie chassis requirements |
Height Above Chassis Frame (Body Roof) |
91" (2,321 mm) |
91" (2,321 mm) |
Height Above Chassis Frame (Body Rear Frame) |
93" (2,369 mm) |
93" (2,369 mm) |
Height Above Chassis Frame (Tailgate Raised) |
160" (4,061 mm |
160" (4,061 mm) |
Body - Outside Width |
96" (2,440 mm) |
96" (2,440 mm) |
Body - Inside Width |
90" (2,294 mm) |
90" (2,294 mm) |
Hopper Depth |
16" (414 mm) |
16" (414 mm) |
Tailgate - Outside Width |
96,5" (2451 mm) |
96,5" (2451 mm) |
Start of Clear CA to Body Front |
Refer to Labrie chassis requirements |
Refer to Labrie chassis requirements |
Top of Step Below Chassis Frame |
25 - 27" (635 - 686 mm) |
25 - 27" (635 - 686 mm) |
Hopper Bottom Below Chassis Frame |
23" (583 mm) |
23" (583 mm) |
Hopper Opening Width |
80" (2,032 mm) |
80" (2,032 mm) |
Hopper Opening Height |
57" (1,460 mm) |
57" (1,460 mm) |
Rear of Body to Rear of Tailgate, Closed |
74" (1,882 mm) |
74" (1,882 mm) |
Loading Sill Below Chassis Frame |
5" (127 mm) |
5" (127 mm) |
Hopper Capacity |
3,5 yd³ (2,7 m³) |
3,5 yd³ (2,7 m³) |
|
|
|
BODY SPECS
|
Heavy Duty 2R-III™ Residential
|
Heavy Duty 2R-III™ Commercial
|
Body Walls |
10 GA |
80,000 psi |
10 GA |
80,000 psi |
Body Roof |
10 GA |
80,000 psi |
10 GA |
80,000 psi |
Flanged Floor Plates |
1/4" (6.4 mm) |
50,000 psi |
1/4" (6.4 mm) |
50,000 psi |
Floor Through |
5/16" (7.9 mm) |
50,000 psi |
5/16" (7.9 mm) |
50,000 psi |
Ejection Face Plate |
3/16" (4.8 mm) |
50,000 psi |
3/16" (4.8 mm) |
50,000 psi |
Body Roof Liner (Body Rear End) |
10 GA |
80,000 psi (STD on Demolition) |
10 GA |
80,000 psi (STD on Demolition) |
Body Sides Liners (Body Rear End) |
10 GA |
80,000 psi (STD on Demolition) |
10 GA |
80,000 psi (STD on Demolition) |
Body Ramp Liners (STD Commercial & Demolition) |
1/4" (6.4 mm) |
80,000 psi (Hardox 450, 175,000 psi optional) |
1/4" (6.4 mm) |
80,000 psi (Hardox 450, 175,000 psi optional) |
|
|
|
|
TAILGATE
|
Heavy Duty 2R-III™ Residential
|
Heavy Duty 2R-III™ Commercial
|
Tailgate Upper Side Walls |
1/4" (6.4 mm) |
50,000 psi (Hardox 450, 175,000 psi optional) |
1/4" (6.4 mm) |
50,000 psi (Hardox 450, 175,000 psi optional) |
Tailgate Lower Side Walls |
1/4" (6.4 mm) |
50,000 psi (Hardox 450, 175,000 psi optional) |
1/4" (6.4 mm) |
50,000 psi (Hardox 450, 175,000 psi optional) |
Hopper Floor Plate |
1/4" (6.4 mm) |
100,000 psi (Hardox 450, 175,000 psi optional) |
1/2" (12.7 mm) |
100,000 psi (Hardox 450, 175,000 psi optional) |
Carrier Face Plate |
3/16" (4.8 mm) |
50,000 psi |
3/16" (4.8 mm) |
50,000 psi |
Packer Face Plate |
1/4" (6.4 mm) |
80,000 psi |
1/4" (6.4 mm) |
80,000 psi |
|
|
|
|
|